Stone‑coated steel roofs for Los Angeles homes in tile and shake looks
Stone-coated steel panels are pressed into tile or shake profiles and coated with stone granules, so they look like a traditional roof while weighing a fraction of tile. Installed as the right system, they make a Class A roof for fire zones.
- Answered 24/7
- Class A system
- Tile and shake profiles
Stone-coated steel roofing in Los Angeles is steel panels formed in tile or shake profiles and finished with bonded stone granules. It weighs far less than tile, installs on battens, and reaches a Class A fire rating only as a system with the specified underlay, which is why we build it as a full assembly.
Updated September 2026
Steel underneath, a traditional roof on top
Each panel is coated steel pressed into a profile, such as barrel tile, shake or a flat shingle look, then covered in stone chips that hide the metal and soften the finish. Panels interlock and fasten to wood battens, so the roof is light and holds well in wind.
It suits homeowners who want tile or shake character without tile's weight or shake's fire risk. Compared with standing seam metal, it reads as a traditional roof; compared with clay tile, it needs no framing reinforcement.
What a stone-coated steel roof costs depends on
Stone-coated steel is priced as a full assembly. Five things set the number:
- Profile and color
Tile and shake profiles and finishes vary in price.
- Tear-off or overlay
A tear-off adds $1,000-$3,000 but exposes the deck.
- Class A underlay
Fire-zone systems need the specified underlay and details.
- Roof shape
Hips, valleys and dormers add trim and cutting.
- Ventilation
Batten roofs pair well with ridge and eave ventilation.
Stone-coated steel, standing seam or tile?
All three can be Class A; they differ in look, weight and cost.
| Roof | Look | Weight | Tradeoff |
|---|---|---|---|
| Stone-coated steel | Tile, shake or shingle profile | Light | Granules can wear on walk paths |
| Standing seam metal | Clean modern lines | Light | Reads as a metal roof |
| Clay or concrete tile | Traditional tile | Heavy | Framing check, higher cost |
Profiles and installation options
Tile-profile stone-coated steel
Barrel and Spanish tile profiles give a Mediterranean look that fits many LA streets. We lay battens over new underlayment, install panels from the eave up with interlocking laps, and finish hips and ridges with matching trim so the roof reads as tile from the street. Colors come in blends that mimic weathered clay, and each panel covers more area than a tile, so a tile look goes on faster and with far less weight on the framing of the house.
Shake-profile stone-coated steel
For homes that had wood shakes, a shake-profile panel keeps the textured look without the fire risk, since wood shakes are no longer allowed on LA re-roofs. It pairs well with a shake conversion, where we sheath over skip decking before the panels go on. The same profile works on additions and garages where the owner wants a look that matches the main house, and the steel holds up well where branches scrape the roof on windy nights.
Batten installation over one existing layer
Because the panels are light and sit on battens, stone-coated steel can sometimes go over a single sound layer of shingles where code allows, saving tear-off cost. We check the deck and layer count first; two layers or a soft deck means a tear-off. An overlay also changes how the roof is vented, so the batten layout leaves an air space, and we add ridge and eave vents that suit the new system on your home.
Brands we install and service
What our stone-coated steel roof includes
Stone-coated systems depend on their details.
- Deck and layer check before quoting
- Fire-rated underlay for Class A where required
- Battens set to the manufacturer's layout
- Panels, hips, ridges and rakes in matching trim
- Flashing at walls, chimneys and skylights
- Ridge and eave ventilation
- Product rating sheets for the inspector
After the January 2025 fires, many homeowners rebuilding in Pacific Palisades and Altadena have chosen stone-coated steel and other metal roofs. The Class A rating comes from the whole system, panels plus the specified underlay, not from the panels alone, so on hillside and fire-zone homes across the city the underlay is named in our written scope alongside the profile and the color.
How a stone-coated steel roof goes on
Roof check
Deck, layers, framing and ventilation are reviewed.
Pick profile and color
Tile, shake or shingle look, with a rated finish.
Permit and prep
Permit pulled, tear-off if needed, underlay installed.
Battens and panels
Battens set, panels interlocked from the eave up.
Trim and inspect
Hips, ridges and flashing finished, then inspection.
Stone-coated steel questions
Straight answers to what people ask us most about this job.
Other ways to reach usAs a system with the specified underlay, yes. The panels alone aren't the whole rating.
Much lighter, so framing reinforcement is rarely needed.
From the street it reads as tile, shake or shingle because of the granule coating.
On battens over a solid deck it isn't noticeably louder than other roofs.
With care, stepping on the low points of the profile; heavy traffic can wear granules.
Yes, and it pairs well with a shake conversion.
Many finishes carry cool-roof ratings, and we specify a listed one where the job requires it.
Other roof replacement & installation jobs we handle
Metal Roofing in Los Angeles
Metal Roofing.
Architectural shingles
Asphalt Shingle Roof Installation.
Room addition tie-ins
New Construction Roofing.
Sheathing over skip decking
Wood Shake Roof Conversion.
Clay tile roof replacement
Clay Tile Roofing.
